250N Safety Components Elevator Speed Governor with Rated Speed 0.5 ~ 1.0m/s

250N Safety Components Elevator Speed Governor , Rated Speed 0.5 ~ 1.0m/s

Elevator Overspeed Governor

The Overspeed Governor is a critical safety device in elevators, designed to prevent catastrophic accidents caused by excessive speed. It consists of a flywheel, centrifugal mechanism, and tripping device, typically installed in the elevator machine room or hoistway.

How It Works

1. Speed Detection: The governor rotates with the elevator car via a rope. If the speed exceeds the preset limit (usually 125% of rated speed), centrifugal force activates the mechanism.

2. Activation: The governor engages a safety gear or triggers an emergency brake, halting the car.

3. Backup Power: Modern systems integrate with electrical safety circuits to cut power if overspeed occurs.

Lifting height:H ≤60m

Tension force of tension device is 250N,the standard tension device is BZJ1

FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.

elevator safety parts

lift spare parts

250N Safety Components Elevator Speed Governor with Rated Speed 0.5 ~ 1.0m/s Images